Glossary Term

Sub-ID Tracking

glossary sub id tracking featured

Sub-ID tracking is the practice of adding your own labels to an affiliate tracking link so that clicks and conversions can be broken down below the affiliate level. The network stores each sub ID with the click and returns it in reports or postbacks when a sale converts. It answers the question an affiliate ID cannot: which placement, traffic source, or creative actually earned the commission.

How Sub-ID Tracking Works

A sub ID is a query parameter on the tracking link. The network or tracker records it at click time and keeps it attached to any conversion that follows.

  1. The affiliate adds one or more sub ID values to the tracking link.
  2. A visitor clicks, and the platform logs the click with those values.
  3. The visitor converts, and the platform matches the conversion to the stored click.
  4. The sub ID values appear in the conversion report and can be passed back to the affiliate’s own tracker.

A TUNE tracking link with two sub IDs looks like this:

https://track.example.com/aff_c?offer_id=12&aff_id=345&aff_sub=youtube&aff_sub2=review-jan26

Platforms return the values through macros in a postback URL. Everflow uses {sub1} through {sub10}, and TUNE uses {aff_sub} through {aff_sub5}. That lets a media buyer see each commission in their own tracking tool, next to their ad spend.

What to Put in a Sub ID

Sub IDs work best for values that repeat across many clicks and that you want to group in a report.

  • Placement. youtube, newsletter, comparison-table. The most common use.
  • Traffic source. The ad network or social platform that sent the click.
  • Campaign or creative. A banner version, an ad set name, or a video ID.
  • Date or flight. jan26 for a seasonal push, so results stay comparable later.
  • Sub-publisher. The site or creator inside a larger publisher network.

Unique per-click values are a different case. TUNE’s documentation says its aff_sub slots are for “non-unique session information” and warns that unique values there are “a common cause of sluggish reporting.” A click ID from your own tracker belongs in the dedicated click ID parameter (aff_click_id on TUNE) where one exists.

Sub ID Slots and Limits by Platform

Each platform caps the number of slots and controls who can see them. Parameter names for the larger networks are listed in the affiliate link tracking entry.

Platform Sub ID slots Notable limit or rule
Impact 3 Sub IDs plus 1 Shared ID 255 alphanumeric characters. Sub IDs are visible only to the partner. The Shared ID is visible to the brand
TUNE 5 (aff_sub to aff_sub5) plus source Meant for non-unique values. Unique values slow reporting
Everflow 10 (sub1 to sub10) Expanded from 5 to 10 slots in May 2026
Awin 6 ClickRefs per link Only ClickRef1 is visible to advertisers. Reports show the first 50 characters

Check limits in your own account before you build a naming scheme. Platforms change them, as Everflow did in 2026.

Sub IDs vs UTM Parameters

Sub IDs and UTM parameters answer the same question for different audiences. Sub IDs live in the affiliate network or tracker and tie a click to a commission. UTM parameters live on the landing page URL and tell the merchant’s analytics, such as GA4, where the visit came from.

Sub IDs usually stay with the network and are not added to the destination page, so GA4 never sees them. Merchants who want placement data in their own analytics tag the destination URL with UTMs as well. An affiliate UTM builder produces the tagged destination before it goes into the network’s deep link.

Sub-ID Tracking Best Practices

  • Fix the slot order. Always use slot 1 for placement, slot 2 for campaign, and so on. Mixing slots splits one source across two report columns.
  • Use lowercase and plain characters. Awin advises lowercase and lists #, +, , ;, &, |, and as characters to avoid. Use hyphens instead of spaces.
  • Keep values short. 50 characters or fewer survives every report listed above.
  • Never pass personal data. Email addresses and names do not belong in a sub ID. Impact frames its customer ID use case as “non-PII customer IDs.” Use an internal hash instead.
  • Document the scheme. A shared naming convention stops yt, youtube, and YouTube from becoming three sources.

Frequently Asked Questions

Is a sub ID the same as an affiliate ID?

No. The affiliate ID identifies the partner and decides who gets paid. A sub ID is an extra label the partner adds to break down their own traffic. One affiliate ID can carry hundreds of different sub ID values over time.

Can advertisers see my sub IDs?

It depends on the platform. On Impact, Sub IDs are private to the partner, and only the Shared ID is exposed to the brand. On Awin, advertisers see only the first ClickRef. Assume any value you pass could be seen by the merchant, and never put anything sensitive in it.

How many sub IDs can you add to one link?

Between 3 and 10 on the major platforms. Impact allows 3 plus a Shared ID, TUNE allows 5, Awin allows 6 ClickRefs, and Everflow allows 10 since May 2026. Most affiliates need only 2 or 3 in practice: placement, campaign, and sometimes date.

Do sub IDs show up in Google Analytics?

Not by default. Sub IDs are stored by the affiliate network or tracker, which usually does not forward them to the landing page. To see placement data in GA4, add UTM parameters to the destination URL as well.

To enforce one naming scheme across sub IDs and UTM tags, set up UTM naming rules for your team in linkutm.